Ceramapanel Compressed Fibre Cement Cladding

Intro Side 2
Introducing

Ceramapanel

Ceramapanel is compressed fibre cement - a mineral composite panel comprising of cement, cellulose and mineral materials, used as a ventilated rainscreen cladding. This is mechanically fastened to a framework which in turn is fixed to substrate walls made of masonry (bricks or blocks), concrete (cast on site or as prefabricated panel), timber or metal frame.

As a cost effective and easy to install facade solution, Ceramapanel is particularly suited to modern methods of construction and is ideal for use in the commercial, residential, education, hotel and leisure sectors where a natural façade finish is required. As a part of the manufacturing process small white flecks may be visible on the product.

The Ceramapanel Natural range, including Textures, Contour and Design, and the Ceramapanel Painted boards all achieve an A1 fire classification in accordance with the procedures given in EN 13501-1:2007+A1:2009.

Taylor Maxwell can offer a factory cutting service which is quoted on a project by project basis. An additional sealant will need to be applied to the edges of any boards that are cut or perforated that are using the Anti-Graffiti finish. Any milling or grooving on the face of a panel will need to be done at the manufacturers factory.

Raw Side
Natural Textures

Raw

  • Ceramapanel Natural Textures Raw is available in a range of 13 through colours, view in the gallery below.
  • Tactile, smooth surface
  • Reaction to fire classification A1 in accordance with the procedures given in EN 13501-1:2007+A1:2009
  • Assumed working life of 25 years minimum as per the provisions in the European Technical Assessment according to ETAG 034
  • Tested in a range of temperatures between -20'C and +60'C and are classed A5 i.e. to EN12467
  • 8, 10 and 12mm thickness available
  • Sheet size - 2500 x 1250, 3050 x 1250mm
  • Secret fix, rivet fix and timber fix options
  • The Ceramapanel Natural range is through coloured, and as such does not have a directional coating applied to the panel. The smooth boards are characterised by fine sanding lines, which may be visible close up when installed.

Printed finishes are also available please send us your design concept contact us to discuss your project requirements.

If you are using Ceramapanel at a low level and require a factory applied anti-graffiti coating, please contact us.

Touch Side
Natural Textures

Touch

  • Ceramapanel Natural Textures Touch is available in a range of 13 through colours, view in the gallery below.
  • Ribboned effect giving the panels a subtle grooved finish
  • Reaction to fire classification A1 in accordance with the procedures given in EN 13501-1:2007+A1:2009
  • Assumed working life of 25 years minimum as per the provisions in the European Technical Assessment according to ETAG 034
  • Tested in a range of temperatures between -20'C and +60'C and are classed A5 i.e. to EN12467
  • 8, 10 and 12mm thickness available
  • Sheet size - 2500 x 1250, 3050 x 1250mm
  • Secret fix, rivet fix and timber fix options
  • The Natural Touch range inherently has lines running through the length of the panels, and as such, are directional.
Sandblasted Side2
Natural Textures

Sandblasted

  • Ceramapanel Natural Textures Sandblasted is available in a range of 10 through colours, view in the gallery below
  • Finely textured facade surface
  • Reaction to fire classification A1 in accordance with the procedures given in EN 13501-1:2007+A1:2009
  • Assumed working life of 25 years minimum as per the provisions in the European Technical Assessment according to ETAG 034
  • Tested in a range of temperatures between -20'C and +60'C and are classed A5 i.e. to EN12467
  • 8, 10 and 12mm thickness available
  • Sheet size - 2500 x 1250, 3050 x 1250mm
  • Secret fix, rivet fix and timber fix options
Shotblasted Side
Natural Textures

Shot-sawn

  • Ceramapanel Natural Textures Shot-sawn is available in a range of 13 through colours, view in the gallery below
  • A smooth but pitted surface giving depth and texture to the facade surface.
  • Reaction to fire classification A1 in accordance with the procedures given in EN 13501-1:2007+A1:2009
  • Assumed working life of 25 years minimum as per the provisions in the European Technical Assessment according to ETAG 034
  • Tested in a range of temperatures between -20'C and +60'C and are classed A5 i.e. to EN12467
  • 8, 10 and 12mm thickness available
  • Sheet size - 2500 x 1250, 3050 x 1250mm
  • Secret fix, rivet fix and timber fix options
Contour Sides
Natural Contour

Groove

  • Ceramapanel Natural Contour Groove is available in a range of 13 through colours, view in the gallery below
  • Reaction to fire classification A1 in accordance with the procedures given in EN 13501-1:2007+A1:2009
  • Assumed working life of 25 years minimum as per the provisions in the European Technical Assessment according to ETAG 034
  • Tested in a range of temperatures between -20'C and +60'C and are classed A5 i.e. to EN12467
  • 10mm and 12mm thickness available
  • 2mm max channel depth and 8mm width. Distance between channels is typically 22mm but can be adjusted according to the design intent - for designs that call for curved channels, please refer to the Design range for more information.
  • Sheet size - 2500 x 1250, 3050 x 1250mm
  • Secret fix, rivet fix and timber fix options
  • The Natural Contour finishes (including Lines and Groove) inherently have lines running through the length of the panels, and as such, are directional.

For more information on the Natural Contour Groove range please contact us on 0203 7949377 or email enquiries@taylor.maxwell.co.uk

Contour Lines Side
Natural Contour

Lines

  • Ceramapanel Natural Contour Lines is available in a range of 13 through colours, as well as Raw and Touch finishes, view in the gallery below
  • Reaction to fire classification A1 in accordance with the procedures given in EN 13501-1:2007+A1:2009
  • Assumed working life of 25 years minimum as per the provisions in the European Technical Assessment according to ETAG 034
  • Tested in a range of temperatures between -20'C and +60'C and are classed A5 i.e. to EN12467
  • 10mm and 12mm thickness available
  • 2mm max channel depth and 8mm width. Distance between channels is typically 152mm
  • Sheet size - 2500 x 1250, 3050 x 1250mm
  • Secret fix, rivet fix and timber fix options
  • The Natural Contour finishes (including Lines and Groove) inherently have lines running through the length of the panels, and as such, are directional.

For more information on the Natural Contour Lines range please contact us on 0203 7949377 or email enquiries@taylor.maxwell.co.uk

Design Side
Natural

Design

Ceramapanel Natural Design offers unparalleled design flexibility. This compressed fibre cement board material is through coloured, meaning the surface displays the inner texture and colour of the core material. Using CNC machines, the material can be perforated and routed with patterns, images or logos to match your project design requirements.

  • Ceramapanel Natural Textures Shot-sawn is available in a range of 13 through colours, view in the gallery below
  • Reaction to fire classification A1 in accordance with the procedures given in EN 13501-1:2007+A1:2009
  • Assumed working life of 25 years minimum as per the provisions in the European Technical Assessment according to ETAG 034
  • Tested in a range of temperatures between -20'C and +60'C and are classed A5 i.e. to EN12467
  • 10 and 12mm thickness available
  • Sheet size - 2500 x 1250, 3050 x 1250mm
  • Secret fix, rivet fix and timber fix options
Natural Painted Side

Painted

  • Ceramapanel Natural Painted is available in a range of 24 standards colours
  • Any RAL or NCS colours available upon request
  • Reaction to fire classification A1 in accordance with the procedures given in EN 13501-1:2007+A1:2009
  • Assumed working life of 25 years minimum as per the provisions in the European Technical Assessment according to ETAG 034
  • Tested in a range of temperatures between -20'C and +60'C and are classed A5 i.e. to EN12467
  • 8, 10 and 12mm thickness available
  • Sheet size - 2500 x 1250, 3050 x 1250mm
  • Secret fix, rivet fix and timber fix options
Perforations

Perforations

Using a perforated cladding material can invigorate the facade of building adding depth, texture and interest to the elevations.

All Ceramapanel boards in the Natural Textures, Design and Painted range can be perforated to to suit your design requirements.

  • Perforations can cover a maximum of 20% of the panel surface
  • Maximum hole diameter is 100mm
  • Minimum distance of 100mm required from the edge of the panel and fixing areas
  • Distance between each perforation should be double the diameter of the perforation

An additional sealant will need to be applied to the edges of any boards that are cut or perforated that are using the Anti-Graffiti finish.

Gallery